Fane SOVEREIGN 10-300 10 Inch Bass & Mid Range Driver

£74.99

2 left in stock

SKU: SOVEREIGN 10-300 Categories: , , Tags: , , ,

Description

  • 600 W Program Power.
  • 97.5 dB Sensitivity (1W/1m).
  • Versatile in 2 way ported enclosures such as the classic bass driver plus horn tweeter or compression driver format.
  • Can be used effectively for bass guitar applications.
  • Exhibits smooth frequency response that gives a balanced tonal character when properly matched to appropriate high-frequency drivers.
  • Best suited for 15-40 Litre ported enclosure designs.
  • 2.5-inch Inside/ outside windings copper voice coil.
    Electro Acoustic Specifications
    Nominal Chassis Diameter 10″ / 254 mm
    Impedance 4 /8 /16 Ω
    Power Handling 300 W (A.E.S.)
    Peak Power (6dB Crest Factor) 1200 W (A.E.S.)
    Usable Frequency Range (-6dB) 45 Hz – 5 kHz
    Sensitivity (1W – 1m) 97.5 dB
    Moving Mass (inc. Air Load) 37 grams
    Minimum Impedance (Zmin) 6.8 Ω
    Effective Piston Diameter 8.46″ / 214.88 mm
    Magnet Weight 56 oz
    Magnetic Gap Depth 0.39″ / 10 mm
    Flux Density 1.0 Tesla
    Coil Winding Height 0.70″ / 18 mm
    Voice Coil Diameter 2.5″ / 63.5 mm
    Speaker Type Bass / Mid Range Driver
    Thiele Small Parameters (TSPs)
    FS 58 Hz
    Re 5.7 Ω
    QMS 6.08
    QES 0.33
    QTS 0.313
    Vas 41 Litres
    Vd 0.208 Litres
    CMS 0.211 mm/N
    BL 15.3 T/m
    MMS 37 grams
    Xmax 5.5 mm
    Sd 378 cm2
    Efficiency 2.36%
    Le 1.68 mH
    EBP 175.76 Hz
    Materials of Construction
    Coil Former Material Glass Fibre
    Voice Coil Material Copper – Inside / Outside Windings
    Magnet Material Ferrite
    Chassis Material Pressed Steel
    Cone Material Curvilinear Paper
    Surround / Edge Termination Polyvinyl Damped Multi Roll. Poly Cotton
    Dust Dome Material Paper
    Connectors Solder Tag
    Polarity Positive voltage at red terminal causes forward motion of cone
    Mounting / Shipping Information
    Overall Diameter 10.15″ / 257.81 mm
    Width Across Flats N/A
    Flange Height 0.27″ / 6.9 mm
    Baffle Hole Diameter F/M 9.21″ / 233.93 mm
    Baffle Hole Diameter R/M 9.21″ / 233.93 mm
    Gasket Supplied Front & Rear
    Outer Fixing Holes 4x ø 6.5 mm on 9.72″ / 246.88 mm PCD
    Inner Fixing Holes Not Applicable
    Depth 4.44″ / 112.77 mm
    Weight 10.57 lb / 4.8 Kg
    Recommended Enclosure Volume 0.88 – 1.76 cu ft / 25 – 50 Litres
    Shipping Weight 10.57 lb / 4.8 Kg
    Packing Carton Dimensions (W) 275 (D) 275 (H) 150 mm